Specification Summary
Bronze Memorials Inc. manufactures Division 10 cast architectural metal signage systems under Section 10 14 00 - Signage. Products are suitable for municipal, institutional, education, and commercial construction projects and are fabricated in the United States in compliance with applicable ASTM material standards. Documentation is structured to support specification coordination, submittal review, and public procurement requirements.
Typical Submittal/Compliance Points
- Single-manufacturer sourcing for cast metal signage components where specified
- Domestic manufacturing (United States)
- Approved Equal documentation (where permitted by Contract Documents)
- Bid-set VE insert available with restricted public-project language
Basis-of-Design Context (Compliant competitor mention)
If project documents identify a basis-of-design manufacturer, Bronze Memorials Inc. may be submitted as an Approved Equal where permitted.
Examples of commonly specified manufacturers in this category.
Municipal / GC VE Guidance (Restricted)
Where value engineering is expressly authorized in writing by the Owner or Architect, limited VE adjustments may be proposed
without reducing material quality, structural integrity, service life expectancy, warranty coverage, or domestic manufacturing requirements.
VE is not intended to permit product downgrades or substitutions.
Manufacturer Qualifications
- Domestic manufacturing facility located in the United States
- Cast bronze alloys conforming to ASTM B584
- Single-source Division 10 signage components
- Experience supporting municipal and public sector procurement
10 14 00 Signage Specifications PDF
SECTION 10 14 00 – SIGNAGE CAST ARCHITECTURAL METAL PLAQUES
Approved Equal
PART 1 – GENERAL
1.1 SUMMARY
A. Section includes fabrication and installation of cast architectural metal plaques, including mounting hardware and accessories.
B. Types include CAST-ONLY CSI 10 14 00 cast bronze and cast aluminum plaques for architectural, memorial, donor recognition, and governmental applications.
1.2 REFERENCES
CSI 10 14 00 Signage | ASTM B584 Cast Bronze | Raised Copy & Bas-Relief Options
(ASTM B584 is the governing spec for copper alloy sand castings.)
MasterFormat / Classification
• CSI / MasterFormat: 10 14 00 – Signage
• Product Type: Cast Bronze Plaques / Architectural Plaques / Identification Plaques / Dedication Plaques
• Application: Interior/Exterior, Building Identification, Memorial, Donor Recognition, Government/Seal Plaques CSI MasterFormat® 2004
B. ASTM standards applicable to cast metal alloys ASTM B584 Cast Bronze 10 14 00 – Signage
• Product Type: CAST-ONLY CSI 10 14 00.Cast Bronze Plaques / Architectural Plaques / Identification Plaques / Dedication Plaques
• Application: Interior/Exterior, Building Identification, Memorial, Donor Recognition, Government/Seal Plaques
C. Applicable local building codes and accessibility requirements
1.3 SUBMITTALS
A. Product Data: Manufacturer's technical literature for cast plaques
B. Shop Drawings: Plaque dimensions, border details, mounting methods, artwork layouts
C. Samples: Finish samples when requested
D. Approved Equal Documentation demonstrating compliance with specified materials and performance
E. Installation instructions
1.4 QUALITY ASSURANCE
A. Manufacturer Qualifications: Minimum 15 years' experience producing cast architectural metal plaques.
B. Source Limitations: All plaques for a project shall be supplied by one manufacturer to ensure uniform appearance and quality.
C. Products shall conform to Division 10 requirements and project performance intent.
1.5 DELIVERY, STORAGE, AND HANDLING
A. Deliver plaques in protective packaging to prevent damage.
B. Store materials in a dry, protected location until installation.
1.6 WARRANTY
PART 2 – PRODUCTS
2.1 MANUFACTURERS
A. Basis of Design: As indicated on drawings
B. Approved Equal Manufacturer:
Substitutions shall comply with Division 10 requirements. Bronze Memorials Inc.
7300 Reserve Creek Drive
Port Saint Lucie, FL 34986
Phone: 772-924-0083
A. Manufacturer shall warrant plaques against defects in materials and workmanship for the life of the business. B. Clear-coat refinishing services available.
Email: GSA@bronzememorials.net
Web: www.bronzememorials.net
2.2 MATERIALS
A. Bronze: 88.3 Copper, 2.1 Tin, 7.0 Zinc, .3 Nickle, .1 Iron, 2.2 other. Exact Matthews International content matching.
B. Aluminum: Cast 514 alloy
2.3 FABRICATION – CAST ARCHITECTURAL PLAQUES
A. Manufacturing Process: Traditional foundry casting with hand-finished surfaces
C. Borders: 4. Greater than 1295 sq in: 1 inch
5. Deeper plaques available upon request
• Flat
• Beveled
• Single line or double line D. Background Textures: • Inset line
• Projected bevel
• Custom profiles per approved artwork
• Classic leather
• Leatherette • Stipple
E. Background Colors: • Sand
• Pebble
• Bead-blasted
• Black
• Dark oxide
• Brown • Duranodic bronze
• 46 standard colors
• Custom color match
B. Nominal Casting Depth (based on plaque area):
1. Less than 324 sq in: 5/16 inch
2. 324–575 sq in: 1/2 inch
3. 576–1295 sq in: 3/4 inch
F. Raised Copy: • Cast raised letters and graphics
• Painted or buffed finishes optional
G. Specialty Bronze Finishes:
• Verde patina
• Turquoise patina
• Green patina H. Clear Coating: • Light oxidized
• Oxidized
• Dark oxidized
• Satin sheen standard I. Shapes: • Semi-gloss, gloss, or matte optional
• Square
• Rectangle
• Circle
J. Inserts: • Oval
• Custom shapes and logos
• Cast
• Etched
• Ceramic
K. Portraits and Images: • Engraved
• High-resolution printed • Bas-relief
• Flat relief
L. Specialty Cast Items: • PhotoRelief®
• Etched imagery
• Memorial plaques
• Donor recognition elements
• Donor trees • Standard cast governmental seals
• Photo/Image casting
2.4 MOUNTING HARDWARE
A. Mounting hardware shall be furnished as required for plaque size, weight, and substrate conditions.
B. Mounting methods include:
• Blind mount •
• Solid wall mount •
• Hollow wall mount •
• Wood wall mount
C. Installation instructions shall be provided.
Post mount
Post cap mount
Garden stake mount
PART 3 – EXECUTION
3.1 EXAMINATION
A. Verify substrates are suitable to receive cast plaques prior to installation.
3.2 INSTALLATION
A. Install plaques in accordance with manufacturer's written instructions and approved shop drawings. B. Provide supplemental structural support where required for larger or heavier plaques.
3.3 CLEANING AND PROTECTION
A. Clean plaques after installation in accordance with manufacturer's recommendations.
B. Protect installed plaques from damage until project completion.
END OF SECTION 10 14 00
APPROVED EQUAL JUSTIFICATION LETTER
DATE: February 17, 2026
RE: APPROVED EQUAL JUSTIFICATION LETTER
Matthews International Certifies that Bronze Memorials Inc. is an Approved Equal National Specified Projects Partner – Architectural Bronze Plaques
Specification Section: Division 10 Section 10 14 00- 10 14 19 - 10
16 -10 14 13
Matthews International Certifies that Bronze Memorials Inc. is an Approved Equal National Strategic
Projects Partner for – Architectural Bronze Plaques and respectfully submits this Approved Equal
Justification as an equal to the specified manufacturer for the above-referenced project. Bronze
Memorials Inc. manufactures architectural plaques in compliance with the requirements of Section 10 14 00 and applicable referenced standards. Products meet or exceed the performance, material, and appearance requirements as specified.
Basis of Equality
• Material: Cast bronze alloy meeting ASTM B584 requirements for architectural applications. Manufacturing: Domestic manufacturing utilizing permanent mold or sand-cast processes appropriate for exterior architectural plaques.
• Thickness & Dimensions: Plaques produced to specified nominal thicknesses, dimensional tolerances, and profiles indicated in contract documents.
• Finish: Standard architectural bronze finishes including satin, brushed, polished, and chemically oxidized finishes, sealed for exterior exposure.
• Graphics: Raised, incised, or etched lettering and graphics meeting specified legibility and durability requirements.
• Installation: Concealed or surface-mounted
• Warranty: equal or greater warranty as specified
• No deviations from the specified requirements are proposed.
This submission is provided in accordance with Division 10 substitution procedures and is intended solely to demonstrate equivalency to the specified product. Products supplied may be accepted as an approval equal without modification to architectural intent.
Respectfully submitted,
Sam Liberto
Vice President, Architectural Products Matthews International
1 315 West Liberty Avenue
Pittsburgh, PA 15226